The Boat (so far)

1FASTLASER · 11-27-06, 07:59 AM

DO NOT put the transducer in the inside bottom. Nothing but problems and VERY limited quality on the screen. And also like ZOOK said be careful about removing all the seats as you did. When the manufacturer built that boat the seats where part of the rigidity of the boat. I would definatly look into a raised deck in the boat to facilatate part of the rigidity back into the boat, or put the livewell in the middle of the boat and make sure she goes from both sides. As I stated when the manufactuerer built this boat the seat where part of the strength in the structure. I been making bass boats out of aluminums for years so I aint just talking from hear say I am talking from expeience.

11-27-06, 07:59 AM	#28
1FASTLASER BassFishin.Com Super Veteran Join Date: Aug 2005 Location: crossett,arkansas Posts: 2,777	DO NOT put the transducer in the inside bottom. Nothing but problems and VERY limited quality on the screen. And also like ZOOK said be careful about removing all the seats as you did. When the manufacturer built that boat the seats where part of the rigidity of the boat. I would definatly look into a raised deck in the boat to facilatate part of the rigidity back into the boat, or put the livewell in the middle of the boat and make sure she goes from both sides. As I stated when the manufactuerer built this boat the seat where part of the strength in the structure. I been making bass boats out of aluminums for years so I aint just talking from hear say I am talking from expeience. __________________ Laser's rule with Merc's doing the pushing..........KEEP THE WETSIDE DOWN AND THE DRY SIDE UP!!!!!!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)