Bass Fishing HomeBass Fishing Forums

Go Back   BassFishin.Com Forums > Serious Conversation Only > Bass Boats, Trailers & Setups

Reply
 
Thread Tools Rate Thread Display Modes
Old 10-15-12, 06:19 PM   #1
maxwell.riddle
BassFishin.Com Member
 
maxwell.riddle's Avatar
 
Join Date: Aug 2012
Location: Oklahoma City, OK
Posts: 16
Default bore out 90hp

if you bored out a 90hp, it wouldnt be a 90hp anymore would it? what would be a normal jump from 90 if you bored one out?
__________________
1988 Skeeter Bass Boat w/ 1985 Yamaha 90hp
maxwell.riddle is offline   Reply With Quote
Old 10-15-12, 07:13 PM   #2
lilmule
BassFishin.Com Super Veteran
 
lilmule's Avatar
 
Join Date: Feb 2010
Location: Buchanan,Tn
Posts: 2,685
Default

It would then be an over bore 90 hp,it makes no sense unless rebuilding as its normal over 30,very costly to rebuild without needing it just to overbore.Change jets and go to fiber carbon reeds will cost less gain about the same hp.Even more gains if you can stick a 115 tuner on it.Most motors blocks and cubic inches are used for more than one hp say 90,115,125
The 2.6 yamaha 150,175,200,225 as an example one cannot easily make a 150 into a 225 as internal changes like as in porting but can make a 175/200 fairly easy.
Talk to a yammer mechanic yours can be a 115 or more for around 600 bucks,river pkgs more expensive from hydro tech would gain more at more cost.
lilmule is offline   Reply With Quote
Old 10-16-12, 12:25 PM   #3
Embrey
BassFishin.Com Veteran Member
 
Join Date: Jan 2010
Posts: 505
Default

boring will gain you nothing noticable
Embrey is offline   Reply With Quote
Old 10-16-12, 12:46 PM   #4
nofearengineer
BassFishin.Com Premier Elite
 
nofearengineer's Avatar
 
Join Date: Mar 2009
Location: Southwest IN
Posts: 5,630
Default

Overboring the cylinders of any internal combustion engine will produce an increase in torque and power roughly proportional to ratio of the new engine displacement to the old one. This will hold true for small, real-world overbores.

I'm not sure what the cylinder bore size on a 90hp outboard is (would need to know make and model), but let's look at one I'm familiar with, the Mercury Optimax. It has a bore/stroke of 3.63/3.00 (inches). That makes the cylinder volume of 31.04 cubic inches. (It's a 3-cylinder, so 3 x 31.04 = 93.12 cubic inches, almost 1 hp per cubic inch, sort of a golden rule for non-supercharged engines.)

If you were to bore the cylinders 0.030 (3.66 inches), the new displacement would be 31.56 cubic inches per cylinder.

The ratio of new to old is 31.56/31.04 = 1.017

So your 90hp outboard should now be putting out 91.5hp.

Congratulations...you've just spent $4,000 on machine work and new pistons to make 1.5 more horsepower. But hey, you will get to your honey hole 3 seconds faster than your rival, right?

This should tell you overboring is almost always to clean up wear or damage, not increase performance. The only time you would "max bore" something is if it already needed cleaning up, and you didn't already have your pistons in hand.
__________________
Many men go fishing all of their lives without knowing it is not fish they are after.
nofearengineer is offline   Reply With Quote
Old 10-16-12, 01:04 PM   #5
maxwell.riddle
BassFishin.Com Member
 
maxwell.riddle's Avatar
 
Join Date: Aug 2012
Location: Oklahoma City, OK
Posts: 16
Default

Well I am paying 1400$ for boring, new pistons and rings, head shaved, carbs rebuilt, new water pump, new oil pump and lower unit oil change.

I lost a cylinder. Had 0 compression. So that's the reason for getting worked on. All the other stuff is to fix the problem that may have caused the cylinder going out.

So tell me if I'm wrong, but 1400$ sounds pretty good for all that work.
__________________
1988 Skeeter Bass Boat w/ 1985 Yamaha 90hp
maxwell.riddle is offline   Reply With Quote
Old 10-16-12, 01:37 PM   #6
bassboogieman
BassFishin.Com Super Veteran
 
bassboogieman's Avatar
 
Join Date: Feb 2006
Location: Parkesburg, Pa.
Posts: 3,762
Default

Are you sure you're getting new pistons? Many shops if they only bore it .0010 over will re-use the pistons and install an over-sized ring. Going with oversized rings would save a chunk of that $1400 (if it includes "new" pistons). You could also sleeve the cylinders, and re-use pistons (assuming they are not damaged). Lots of options. Whatever, a $1400 rebuild is better than a new outboard, but you won't see a noticible increase in th HP output. Just make sure you get what you pay for.
bassboogieman is offline   Reply With Quote
Old 10-16-12, 02:35 PM   #7
nofearengineer
BassFishin.Com Premier Elite
 
nofearengineer's Avatar
 
Join Date: Mar 2009
Location: Southwest IN
Posts: 5,630
Default

$1400 sounds like a great deal for that amount of work. Make sure they do quality work. Peace of mind is very expensive.
__________________
Many men go fishing all of their lives without knowing it is not fish they are after.
nofearengineer is offline   Reply With Quote
Old 10-16-12, 05:58 PM   #8
Embrey
BassFishin.Com Veteran Member
 
Join Date: Jan 2010
Posts: 505
Default

1400 sounds scary cheap and over size rings and/or bore on same size piston is not only wrong, but will probably explode soon.
Embrey is offline   Reply With Quote
Old 10-16-12, 06:02 PM   #9
maxwell.riddle
BassFishin.Com Member
 
maxwell.riddle's Avatar
 
Join Date: Aug 2012
Location: Oklahoma City, OK
Posts: 16
Default

well i was sent to the guy by a very reliable source, and they told me he just did the same thing for another guy a month or so ago. supposed to be new pistons and rings.

oh and my mistake, its $1600. but still great deal.
__________________
1988 Skeeter Bass Boat w/ 1985 Yamaha 90hp
maxwell.riddle is offline   Reply With Quote
Old 10-16-12, 08:41 PM   #10
bamabassman
BassFishin.Com Premier Elite
 
bamabassman's Avatar
 
Join Date: Jan 2008
Location: cedar bluff, alabama
Posts: 15,292
Default

ok, i am NOT a mechanic, nor do i know much aobut prices on rebuilds. BUT i DID ask my dealer what the average price was on a rebuild. HE said to replace the power head was around $2500.00. so......in my opion ONLY, if oyu are having the entire motor rebuilt for $1600.00 it SOUNDS like a good deal. as long as they are a reputable shop. you WILL find out afterwards.

did they say what kind of WARRENTY you would be gitting on this?
__________________
so many lures, so little time.
bamabassman is offline   Reply With Quote
Old 10-17-12, 10:47 AM   #11
lilmule
BassFishin.Com Super Veteran
 
lilmule's Avatar
 
Join Date: Feb 2010
Location: Buchanan,Tn
Posts: 2,685
Default

Boring and pistons can cost that little,not doing a lot more id say,and a 90 hp rebuild costs a tad less than say a 250 hp one.As for any gains they are minimal more in torque than anywhere,and during break in period with double oil wont even notice.
Often the cure can be a used motor that may cost less,Id sell you a decent 150 hp 1989 2.6 yamaha for 1800,low hrs to boot,with associated wiring oiler and shifter.
That might be above what you need hp wise but a good reference also have 1977 140,and a franken rude costs a tad more.
Used outboards are like from 1500 up from 90 to 150 hp,between private sellers not dealers.

Last edited by lilmule; 10-17-12 at 10:54 AM.
lilmule is offline   Reply With Quote
Old 10-17-12, 04:20 PM   #12
bamabassman
BassFishin.Com Premier Elite
 
bamabassman's Avatar
 
Join Date: Jan 2008
Location: cedar bluff, alabama
Posts: 15,292
Default

muley...i ain't forgot about that motor bud. but if oyu can sell it, sell it pal. if i can...we'lll talk when i get dad to give the ok bud.
__________________
so many lures, so little time.
bamabassman is offline   Reply With Quote
Reply

Disclosure / Disclaimer
Before acting on the content posted, you should know that BassFishin.Com may benefit financially and otherwise from content, advertising, links or otherwise from anything you click on, read, or look at on our website. Click here to read our Disclosure Policy and Disclaimer.


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:04 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2013 BassFishin.Com LLC