07-10-07, 09:38 PM | #1 |
BassFishin.Com Member
Join Date: Jul 2007
Location: Gonzales, LA
Posts: 3
|
Replacing styrofoam under floor board
First of all, I would like to say this is my first thread. I stumbbled on to this site a few months back and the wealth of knowledge I have gathered from you all is unbelieveable. Thanks in advance. Now my question. After 51 years I finally got my first boat, 89 bass tracker. (fished all my life in a 14' batou with a 10 horse johnson). The tracker is in good condition, but I had to replace the decking and floor. And it turned out great with all the good advice I read from you all. The question I have is under the floor board there was some styrofoam. The styrofoam was all tore up so I threw it out. Do I really need to replace it? Where can I get some? Any alternatives? Thanks for your advice.
|
07-11-07, 10:53 AM | #2 |
BassFishin.Com Veteran Member
Join Date: Jan 2006
Location: Paducah, KY
Posts: 730
|
First of all, welcome to the site.
I am not a boat expert, but I would think that the styrofoam would provide some sound deading and maybe some stability. This is my thought. I am sure that some of the folks that visit this board will chime in with some great information. |
07-11-07, 05:22 PM | #3 |
BassFishin.Com Premier Elite
Join Date: Jan 2004
Location: denton nc
Posts: 13,441
|
welcome to the site..
ok on to your question i would not.. the foam creates a water barrier. which can trap/hold water for a long time which aint good in winter temps this water trapped in the foam will freeze. ice trapped inside the boat hull is NOT good..under the floor board likly it would be used as a sound barrier.. zooker
__________________
the godfather.. aml in remission since 7-20-09 |
07-11-07, 07:07 PM | #4 |
BassFishin.Com Active Member
Join Date: Jun 2004
Location: Greenwood, IN
Posts: 212
|
Welcome! I saw the same question asked on another site dedicated to boat restoration and the guys on there said that you don't have to replace the styrofoam. Apparently the Coast Guard requires boat manufacturers to put it in the boat. I think the only thing it really does is decrease the rate at which the boat will sink. It won't keep it from sinking, if it's going to go down. It will just give you a little more time to tie all your gear to an extra life vest.
__________________
Strap Indianapolis, IN "Speak softly and carry a big stick." Pitching stick that is. |
07-13-07, 11:55 AM | #5 |
BassFishin.Com Member
Join Date: Jul 2007
Location: Gonzales, LA
Posts: 3
|
Thanks for the info. Appreciate you taking the time to respond. I think I will skip the styrofoam, put down the boards, and hit the bayous.
|
07-13-07, 06:52 PM | #6 |
BassFishin.Com Super Veteran
Join Date: Aug 2005
Location: crossett,arkansas
Posts: 2,777
|
Leave out the strofoam. As zook said all it does is act as a sponge and cost you more headaches later. I am closing up the resoration on a lil 16ft booat that has been a labor of love and even after spending 2 years on building da boat NO styrofoam in my boat to do damage again.
__________________
Laser's rule with Merc's doing the pushing..........KEEP THE WETSIDE DOWN AND THE DRY SIDE UP!!!!!! |
07-17-07, 08:50 PM | #7 |
BassFishin.Com Super Veteran
Join Date: Jun 2004
Location: Palm Bay, Fl
Posts: 2,751
|
I like the styrofoam to deaden sound. However I've been using the spray in expanding foam. Tin cans make a lot of noise. Haven't seen any problems with this stuff holding water on me.
__________________
In the Lord all things are possible. |
07-18-07, 11:04 AM | #8 |
BassFishin.Com Active Member
Join Date: Feb 2007
Location: East Central Illinois
Posts: 213
|
i'm not 100% sure but when I bought my aluminum boat i was told the styrofoam hidden in mine would be enough to keep it afloat in the event of capsize... maybe it will depend on the boat but it might not be a bad idea to just contact the manufacturer and see if maybe it is enough to keep it afloat... just an idea. Good Luck!
__________________
"Cuttin Class to Catch Bass..." www .wiu. edu/users/fishing |
07-20-07, 11:49 AM | #9 | |
BassFishin.Com Super Veteran
Join Date: Mar 2006
Posts: 1,270
|
Quote:
Mmmmmmmm...dinnahhhhh is served!" Signed: Al I. Gator |
|
07-26-07, 11:45 AM | #10 |
BassFishin.Com Member
Join Date: Jul 2007
Location: Gonzales, LA
Posts: 3
|
Ah yes indeed flyrod...but down here in the great state of Louisiana, the gator would be dinner...nothing like a good alligator sauce piquant after a hard days fishing |
07-29-07, 10:53 AM | #11 |
BassFishin.Com Super Veteran
Join Date: Aug 2005
Location: crossett,arkansas
Posts: 2,777
|
Yes the foam is a sound deadner. The spray foam is good stuff as long as you dont over do it. It does expand. Most boat manufacturers put in what the call a pourable foam and it expands as well. If you wanna put some in make sure you leave a way for water to channel out such as a piece of small pvc piping the length of the boat and then spay the foam in. This will allow the water to channel out and alleviate the fear of the foam becoming water logged as well. The foam in my restoration boat will be in the sides of the boat. Hard to explain how I am doing this but I will float if I hit a stump but not have to worry bout foam being water logged. Water logged foam is a boat's worst enemy.
__________________
Laser's rule with Merc's doing the pushing..........KEEP THE WETSIDE DOWN AND THE DRY SIDE UP!!!!!! |
Disclosure / Disclaimer
Before acting on the content posted, you should know that BassFishin.Com may benefit financially and otherwise from content, advertising, links or otherwise from anything you click on, read, or look at on our website. Click here to read our Disclosure Policy and Disclaimer. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|