09-17-11, 01:50 PM | #1 |
BassFishin.Com Member
Join Date: Apr 2010
Location: Southern, WV
Posts: 38
|
Another Revo SKT question
I recently got the Revo SKT. You guys gave me some good info last time I asked a question about it, so here's another. How do I get the cover off the non-handle side to adjust the brakes?
|
09-17-11, 03:30 PM | #2 |
BassFishin.Com Premier Elite
|
On the handle side plate, there's a small screw knob near front and top of the reel with a metal bar going across the spool opening to the other side. unscrew it, then turn the non-handle side plate and pull. Be careful so you don't drop the side plate especially when adjusting brakes on the water.
BB
__________________
As of June 14, 2014 the members of the BF.com forum have moved to basschat.yuku.com! |
09-17-11, 07:26 PM | #3 |
BassFishin.Com Member
Join Date: Apr 2010
Location: Southern, WV
Posts: 38
|
Thanks, my two other Revos have the magnetic braking, so does my BPS Extreme and Black Max, so this is my first venture into centrifugal brakes.
|
09-17-11, 07:46 PM | #4 |
BassFishin.Com Premier Elite
|
Good luck with it! Just remember, centrifugal brakes must be set up so they are symmetrical. So in most cases, if you turn one on, the one across from it must be on as well. The exception to this rule is having three brakes on, and in that case, turn every other one on.
I don't throw a wide variety of lures with my SKT, mostly 1/4-3/8oz shallow cranks. So I set my brakes with two on and rarely ever change it. BB
__________________
As of June 14, 2014 the members of the BF.com forum have moved to basschat.yuku.com! |
Disclosure / Disclaimer
Before acting on the content posted, you should know that BassFishin.Com may benefit financially and otherwise from content, advertising, links or otherwise from anything you click on, read, or look at on our website. Click here to read our Disclosure Policy and Disclaimer. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|