![]() |
#11 | ||
BassFishin.Com Member
Join Date: May 2010
Posts: 5
|
![]()
I have seen the points get rough, but not bent. I really don't plan on testing them anymore in the future because of the cost. I have enough experience with the cutting point by Owner to know that the faceted point is less then ideal. In general I have had very good luck with Gamakatsu and the Owner needle point hooks.
Quote:
Good analogy nofear. A well produced conical point will penetrate with the least interruption, but is more difficult to manufacture and that is why only the premium hook manufactures use this design. If you were to examine a Gama or Owner before they were prepped/honed by electro polishing they would be as sharp or sharper then the Trokars. The hooks sharpness is reduced slightly using this controlled process to yield a point that matches the hooks general magnitude and intended use. If your punchin with 20-25# FC or 50-65 braid you do not need the same point that a DS hook requires. Quote:
Last edited by ALL; 05-20-10 at 10:25 PM. |
||
![]() |
Disclosure / Disclaimer
Before acting on the content posted, you should know that BassFishin.Com may benefit financially and otherwise from content, advertising, links or otherwise from anything you click on, read, or look at on our website. Click here to read our Disclosure Policy and Disclaimer. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|