|
|
|
Thread Tools | Rate Thread | Display Modes |
08-15-11, 11:57 PM | #1 |
BassFishin.Com Member
Join Date: Aug 2011
Posts: 11
|
Lowrance LSS-1 Question for Todd Driscoll or Anyone else with answers
I have a LSS-1, HDS7, and HDS5 and they are networked with ethernet cables to each other. My yellow wire from my LSS-1 is switched so I can turn that unit on and off to save battery power while fishing. I have used this set up a couple of times and everything worked fine. Now I am getting a (No Source) message on my downscan and sidescan screens on both units. I have only a red light on my LSS-1 unit now. I have tried wiggling my cables to see if I can get a connection but nothing seems to work. I have read some info about rebooting my LSS-1 but cant find out how or if this would work. Any help would be appreciated.
|
08-16-11, 02:22 PM | #2 |
BassFishin.Com Member
Join Date: Jan 2011
Location: Sam Rayburn, TX
Posts: 90
|
Since you have "no source" on both units and only the red light, I would suspect you lost power to your yellow wire. Check your in-line fuse and voltage to the switch, and then verify that your switch is functioning and you are getting voltage thru the switch to the unit. Let me know what you find.
__________________
Todd Driscoll - Lowrance Pro Staff |
08-17-11, 08:15 AM | #3 |
BassFishin.Com Member
Join Date: Aug 2011
Posts: 11
|
Thanks for getting back with me so quick. It will be a few days before I can work on it, I will get back with you.
|
08-23-11, 11:29 PM | #4 |
BassFishin.Com Member
Join Date: Aug 2011
Posts: 11
|
Todd,
I unhooked all my wires and started from scratch. Ran a hot wire straight from my battery and hooked a fuse to it and then all my red and yellow wires together on it and all my black to the ground this was to eliminate all the possible bad connections. I still get the no source screen on both my front and back unit and only have the red light on my LSS-1. My front unit is hooked up to a different point of power then the back unit but is connected through an ethernet cable to the LSS-1. I had to unscrew the power cable on the right side of my LSS-1 to get the red light to go off because nothing is on a switch at this point. What do I need to try now. Tom |
08-25-11, 05:36 AM | #5 |
BassFishin.Com Super Veteran
Join Date: Feb 2010
Location: Buchanan,Tn
Posts: 2,685
|
While I own a different brand last time mine said that turned out to be a bad wire and or transducer,replacing solved it.Couldnt find one bad spot in it either,yet replacing was the thing that worked,tad more costly however.
And id put a switch in. |
08-27-11, 10:57 AM | #6 | |
BassFishin.Com Member
Join Date: Jan 2011
Location: Sam Rayburn, TX
Posts: 90
|
Quote:
__________________
Todd Driscoll - Lowrance Pro Staff |
|
08-27-11, 10:22 PM | #7 |
BassFishin.Com Member
Join Date: Jan 2011
Location: Sam Rayburn, TX
Posts: 90
|
Tom, our Product Expert agreed with me regarding your LSS, likely a faulty unit. Call CS at 800-324-1356 for a Return Authorization. Explain to them what you've done and what we discussed here.
__________________
Todd Driscoll - Lowrance Pro Staff |
08-28-11, 04:44 PM | #8 |
BassFishin.Com Member
Join Date: Aug 2011
Posts: 11
|
Thanks Todd I will give them a call.
|
08-29-11, 03:34 PM | #9 |
BassFishin.Com Member
Join Date: Aug 2011
Posts: 11
|
Todd,
I talked to customer service today and told them everything we talked about. They said if the red power light is on and not blinking and the other lights are not on, with no source message on both units it needs to be rebooted. I am going to have to send it in. |
08-30-11, 09:19 AM | #10 |
BassFishin.Com Member
Join Date: Jan 2011
Location: Sam Rayburn, TX
Posts: 90
|
Sorry for the trouble, but glad CS is going to get you up and going again.
__________________
Todd Driscoll - Lowrance Pro Staff |
10-21-11, 08:14 AM | #11 |
BassFishin.Com Member
Join Date: Aug 2011
Posts: 11
|
Got New Unit From Lowrance
Wanted to post a follow up on my LSS-1 unit I was having trouble with. Lowrance sent me a new unit and I finally got it put on and took it to the lake and tried it out. Everything is working fine now so it had to be the unit not my cables or HDS units. I also wanted to thank Todd again for helping me with this problem.
|
10-21-11, 10:05 AM | #12 |
BassFishin.Com Member
Join Date: Jan 2011
Location: Sam Rayburn, TX
Posts: 90
|
Sounds great Tom, glad to help, and thanks for posting the follow-up!
__________________
Todd Driscoll - Lowrance Pro Staff |
Disclosure / Disclaimer
Before acting on the content posted, you should know that BassFishin.Com may benefit financially and otherwise from content, advertising, links or otherwise from anything you click on, read, or look at on our website. Click here to read our Disclosure Policy and Disclaimer. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|