Bass Fishing HomeBass Fishing Forums

Go Back   BassFishin.Com Forums > Serious Conversation Only > Bass Boats, Trailers & Setups

Reply
 
Thread Tools Rating: Thread Rating: 6 votes, 5.00 average. Display Modes
Old 02-16-13, 03:32 PM   #1
sdesi2010
BassFishin.Com Member
 
Join Date: May 2011
Posts: 41
Default Boat Leak Test

So here's my dilemma:

I bought a 14' jon boat off clist about a month or so ago. Its middle of winter so obviously couldn't put it in the water prior to buying. The boat looks mint.

I may be over thinking this but I'm just concerned that the boat might leak. Now it has me actually worrying about it.

So here is my idea to test it. Once it warms up a little, I want to fill the boat with water, not all the way up, just enough to cover the bottom of the boat. Then I can check to see if it leaks. My thoughts are that if it leaks, the water is just as apt to seep out as it is to leak in when I'm on the water. Thoughts?

Also, its a riveted jon boat, and I know aluminum isn't the easiest thing to weld, but if a rivet or two does leak can I just weld the rivet or what other experiences have you had with fixing these types of boats?
sdesi2010 is offline   Reply With Quote
Old 02-16-13, 04:07 PM   #2
kennethdaysale
BassFishin.Com Super Veteran
 
kennethdaysale's Avatar
 
Join Date: Aug 2011
Location: rock hill, sc
Posts: 2,315
Default

If it looks mint it probably is. You can fill it with water but thats a lot of work and sometimes the where you see the water dripping isn't really where the leak is. JBweld is far cheaper, easier and just as effective as trying to find somebody who knows how to weld aluminum. For detailed tutorials and good alum boat mods and repairs, these guys are experts....www.tinboats.com
__________________
Sometimes you gotta risk it to get the biscuit.
kennethdaysale is offline   Reply With Quote
Old 02-16-13, 04:52 PM   #3
WTL
BassFishin.Com Premier Elite
 
WTL's Avatar
 
Join Date: Dec 2001
Location: Huntsville, Al
Posts: 7,466
Default

Filling it up a little is what I would do, not all the way as you said. It will let you know where there could be some trouble.

I second JB Weld, or JB Quik as your better options if you do find problem areas. JB weld is pretty good stuff, maybe not as good as if you could find someone to weld, but the trouble it saves is worth it.
__________________
Selling live waterdogs for less since 2005.
WTL is offline   Reply With Quote
Old 02-16-13, 09:12 PM   #4
bamabassman
BassFishin.Com Premier Elite
 
bamabassman's Avatar
 
Join Date: Jan 2008
Location: cedar bluff, alabama
Posts: 15,292
Default

well if it were ME, i would fill it to at LEAST the to of the seats. those rivets on the seats can be a leaky spot.

3rd the Jb weld IS A GREAT LEAK STOPPER.
__________________
so many lures, so little time.
bamabassman is offline   Reply With Quote
Old 02-16-13, 10:16 PM   #5
lilmule
BassFishin.Com Super Veteran
 
lilmule's Avatar
 
Join Date: Feb 2010
Location: Buchanan,Tn
Posts: 2,685
Default

Wont likly show if its a tiny leak dirt would clog the hole up,wait a tad longer and float on the trailer at first,then if you do have one like another said jb wield.
Wouldnt sweat it if it looks pristine most likly is,if an older boat where pop rivets all leak its scrap metal.Float any boat you are going to buy then you wont worry,and if off craigs list float it twice then once more to make sure.
I bought my first boat out of a back yard and it was full of snow-fiberglass and wood -was lucky no rot.
That link he gave you should be of help if it does.
I dont normally buy where one cannot try them ever.Id even cut a hole in the ice with a chainsaw,and if it sank be the owners problem getting it out.Older alum as well as fiberglass dont have much floatation.

Last edited by lilmule; 02-16-13 at 10:24 PM.
lilmule is offline   Reply With Quote
Old 02-17-13, 08:19 AM   #6
sdesi2010
BassFishin.Com Member
 
Join Date: May 2011
Posts: 41
Default

Thanks for all the info.

If I do find a leaky rivet, do you recommend jb weld inside, outside or both sides?
sdesi2010 is offline   Reply With Quote
Old 02-17-13, 08:01 PM   #7
lilmule
BassFishin.Com Super Veteran
 
lilmule's Avatar
 
Join Date: Feb 2010
Location: Buchanan,Tn
Posts: 2,685
Default

If you get it to take on one side test then do the other side is my guess.
JB wield once i takes is as strong as the original metal or better,I once had a master brake cyl fail hole in side,after attempting to get all the rusty bolts loose gave jb a whirl,as no fluid in it,after it sat 1/2 hr filled it up 2 years later traded the ol rust bucket in on another slightly less rusted.Point is never did take it off it held hole was 1/4 and break master cyl are under lots of psi.
May be all mute may not leak.
lilmule is offline   Reply With Quote
Old 02-17-13, 08:47 PM   #8
bamabassman
BassFishin.Com Premier Elite
 
bamabassman's Avatar
 
Join Date: Jan 2008
Location: cedar bluff, alabama
Posts: 15,292
Default

if it were ME, iw ould go to lowes or home depot and buy a riveter and some rivets, 1 SIZE larger than what is in it. then i would drill out the leaky rivet and instal a NEW one. but that is ME.
__________________
so many lures, so little time.
bamabassman is offline   Reply With Quote
Old 02-18-13, 05:46 PM   #9
nobass
BassFishin.Com Super Veteran
 
Join Date: Jul 2003
Location: clarksville, tn,
Posts: 1,690
Default

sometimes if is just one or two rivets have a buddy go under boat and you on top. you will need two hammers . have your buddy hold is on rivet and you tap down rivet. this will tighten them up. then dap a little marine grade jb weld on inside and out that will stop leaks. or do like bama said if you cannot stop it drill out old and replace with new
__________________
the only easy day was yesterday
nobass is offline   Reply With Quote
Old 02-18-13, 08:44 PM   #10
bassinbob
BassFishin.Com Super Veteran
 
bassinbob's Avatar
 
Join Date: Nov 2004
Location: Pitts. Pa.
Posts: 3,801
Default

I would take the boat off the trailer so you can get to the leak(s) if present. Mark spot with a marker so you remember where it is. That's what i did when my boat was leaking. I just used the jb weld on the outside and the stuff lasts forever. Another thing if one of the rivits falls out while you are fishing or going fishing take some small sheet metal screws slightly larger than the rivet hole. Screw the screw in and it temporarily saves the day. I always carry a couple of screws with me just in case. But like the others said being clean it should be fine. Just a question. Did you ask the person you bought the boat from if it leaked?
__________________
you can have my fishin rod when ya take it from my cold dead hands
bassinbob is offline   Reply With Quote
Old 02-20-13, 08:56 PM   #11
Rebbasser
BassFishin.Com Premier Elite
 
Rebbasser's Avatar
 
Join Date: Jun 2003
Location: San Antonio, TX
Posts: 10,141
Default

Good idea on how to test and ditto on the JB Weld.
__________________
It's happened to the best of them: John 21:3
Rebbasser is offline   Reply With Quote
Reply

Disclosure / Disclaimer
Before acting on the content posted, you should know that BassFishin.Com may benefit financially and otherwise from content, advertising, links or otherwise from anything you click on, read, or look at on our website. Click here to read our Disclosure Policy and Disclaimer.


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:16 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2013 BassFishin.Com LLC