![]() |
#1 |
Guest
Posts: n/a
|
![]()
I recently bought a '93 stratos 250v. 15 footer with a '91 evinrude 40 hp motor. It doesnt want to plan out well and i was told the old prop was damaged and replaced. The previous owner just went to a store and bought the first prop he saw rated for a 40hp motor. I think it has the wrong pitch. Does anyone know what pitch i need or where i can find out?
|
![]() |
![]() |
#2 |
BassFishin.Com Member
|
![]()
Check the post right below this one
![]() Lizards |
![]() |
![]() |
![]() |
#3 |
BassFishin.Com Member
|
![]()
Mike, You can put a few different pitched props on it for a heavy load carry, a 12-1/2 X 13 prop for a faster prop but less load bearing weight you can use a 12-1/4 X 15 prop. The first number is the prop size and the second number is the pitch.There are a few more but this will give you an idea . Also you may want to go with a3 or 4 blade prop rather than a 2 blade. It will help you carry the weight better and get on plane easier. I hope this helps. ;D P N J
|
![]() |
![]() |
![]() |
#4 |
Guest
Posts: n/a
|
![]()
Thanks for the help. Is there a way to tell what pitch i currently have on it since it was already there when i bought it?
|
![]() |
![]() |
#5 |
BassFishin.Com Member
|
![]()
Mike, There usually is the number of the pitch stamped on the prop . It will be on the main part of the hub. there usually is a P after the number but not always. I hope this helps. P N J
|
![]() |
![]() |
![]() |
#6 |
BassFishin.Com Member
|
![]()
go to http://www.bassboatcentral.com/
somebody probably has the same boat,i'm sure they can help you. |
![]() |
![]() |
![]() |
Disclosure / Disclaimer
Before acting on the content posted, you should know that BassFishin.Com may benefit financially and otherwise from content, advertising, links or otherwise from anything you click on, read, or look at on our website. Click here to read our Disclosure Policy and Disclaimer. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | Rate This Thread |
|
|