Got us again..

MrPhotographer06 · 03-13-09, 07:59 PM

..got us again..

i bought 6 new wally-world spinnerbaits.. a new M-H casting rod and the numbers for the side of the boat..Anthony got a bag of lizards, two crankbaits, two spinnerbaits and some 12lb suffix mono

i'll put them the stickers on tomorrow sometime.. i just found out i've gotta work tomorrow but it'll make up for the money i spent today and help pay for the seat pedistals and whatnot to finish up the boat.

oh and my grandpa gave me 3 sets of hinges for the deck so i can go ahead and finish that up

he had 4 but i did one door already.. so i'll just leave those holes in it

i also changed the hinge placement and top-hinged and it works better..

i may get some seafoam after work tomorrow and try and run the motor some to get the carb cleaned out and may get on the water sometime next week after school. i wont be home saturday and sunday the boat is getting a full carb clean so i probally wont be able to do anything then

MrPhotographer06 · 03-13-09, 08:01 PM

oh and that M-H totallyyyy beats anthonys M spinning rod.. its so much better and dosent flex as much.. also the suffix braid be bought not too long ago works great.. i got my baitcaster back casting again.. it hadnt been casted since i cleaned it so it was real loud and hard to spin.. i got it working good now and she works good.. but the suffix braid, when its wet , puts out a green florrescent looking dye crap..

Jim80 · 03-13-09, 08:05 PM

dang monkey , oh well it's not like you didn't need the stuff right ?

Jim

Jim80 · 03-13-09, 08:06 PM

Quote:

Originally Posted by MrPhotographer06

oh and that M-H totallyyyy beats anthonys M spinning rod.. its so much better and dosent flex as much.. also the suffix braid be bought not too long ago works great.. i got my baitcaster back casting again.. it hadnt been casted since i cleaned it so it was real loud and hard to spin.. i got it working good now and she works good.. but the suffix braid, when its wet , puts out a green florrescent looking dye crap..

It's just the extra die coming off the line nothing to worry about .

Jim

MrPhotographer06 · 03-13-09, 08:11 PM

alright.. well it stained the cork on my new rod..

oh well.. haha

Jim80 · 03-13-09, 08:17 PM

it should were off sooner or later , but in the mean time your just stuck with it .

Jim

MrPhotographer06 · 03-13-09, 08:20 PM

iiighhtttt

aikenyounggun · 03-13-09, 09:04 PM

are those walmart spinnerbaits good? just wopnderin....

MrPhotographer06 · 03-13-09, 09:09 PM

i think there just as good as any other spinner bait..

they have lead heads.. ..blades, wire and a skirt..

and produce.. so i'd say there just as good as the 3-6 buck baits..

Bubba_Bruiser · 03-13-09, 10:08 PM

I had to use the Chuck Norris techniques yesterday. I came through Baton Rogue and stopped at BPS. I had a St Croiux (M) spinning rod in my hands. I have been looking for 1for drop shotting and shakey heading. I had a benny and his half brother tucked in my wallet. But I fought and left empty handed somehow. If the oilfield wasn't so bad though, I might have left with a Kistler or E21.

BassBandit · 03-13-09, 10:11 PM

12# Sufix is a good choice. I really like Sufix. You'll be happy with it.

OrygunBasser · 03-13-09, 10:20 PM

Quote:

Originally Posted by aikenyounggun

are those walmart spinnerbaits good? just wopnderin....

I buy cheap spinnerbaits, and then spend a couple dollars and buy a package of ball bearing swivels and change them out. They spinn a bunch better and you can slow roll them a lot easier and they start spinning faster too. Absolutly nothing wrong with being cheap but you can be smart also!

Oh, How glad I am that I do not have a BPS anywhere near me!

Damn the bait monkey!

WTL · 03-13-09, 11:05 PM

That looks like a Shakespeare Excursion rod. I have 3 or 4, dont use them much. For $12 they are working rods.

MrPhotographer06 · 03-14-09, 08:55 AM

yeah.. anthony got a spinning one and i liked it but M was too light

Bassboss · 03-14-09, 10:06 AM

Nice lookin bundle of tackle! What rod is that btw, how much'd it cost you?

Good luck with your boat and your fishing!

Bassboss · 03-14-09, 10:09 AM

Quote:

Originally Posted by aikenyounggun

are those walmart spinnerbaits good? just wopnderin....

Yes! I like them very much! Great hook! The only thing I don't like is that the weir is easily bent, and they only come in 1/4 oz.

Oh well they are the only spinnerbaits I've caught bass on this year!?

Bassboss · 03-14-09, 10:10 AM

Quote:

Originally Posted by Bassboss

Yes! I like them very much! Great hook! The only thing I don't like is that the weir is easily bent, and they only come in 1/4 oz.

Oh well they are the only spinnerbaits I've caught bass on this year!?

Oh and also the skirt dose not have nuff strands IMO! But they work!

aikenyounggun · 03-14-09, 10:16 AM

i might buy a couple b/c a new pond i fished the other day is full of cover and i dont want to lose exspensive spinnerbaits.... that pond is gion to be dynamite for a spinnerbait when it warms up just a little.... there are submerged christmas trees everywhere

MrPhotographer06 · 03-14-09, 06:06 PM

Quote:

Originally Posted by aikenyounggun

i might buy a couple b/c a new pond i fished the other day is full of cover and i dont want to lose exspensive spinnerbaits....

thats why i use them..

i fish alot of cover and around trees.. and when i lose a 1 buck bait i'm mad.. but i lost 4 quarters.. not 4 dollars

oh and my grandpa runs a christmas tree farm .. i need to get some of the dead ones and drop them in the water at my fave. ponds

03-13-09, 07:59 PM	#1
MrPhotographer06 BassFishin.Com Super Veteran Join Date: Mar 2007 Location: Fort Bragg, NC Posts: 2,096	Got us again.. ..got us again.. i bought 6 new wally-world spinnerbaits.. a new M-H casting rod and the numbers for the side of the boat..Anthony got a bag of lizards, two crankbaits, two spinnerbaits and some 12lb suffix mono i'll put them the stickers on tomorrow sometime.. i just found out i've gotta work tomorrow but it'll make up for the money i spent today and help pay for the seat pedistals and whatnot to finish up the boat. oh and my grandpa gave me 3 sets of hinges for the deck so i can go ahead and finish that up he had 4 but i did one door already.. so i'll just leave those holes in it i also changed the hinge placement and top-hinged and it works better.. i may get some seafoam after work tomorrow and try and run the motor some to get the carb cleaned out and may get on the water sometime next week after school. i wont be home saturday and sunday the boat is getting a full carb clean so i probally wont be able to do anything then __________________ For Those I Love, I will Sacrifice: US Army since 2012

03-13-09, 08:01 PM	#2
MrPhotographer06 BassFishin.Com Super Veteran Join Date: Mar 2007 Location: Fort Bragg, NC Posts: 2,096	oh and that M-H totallyyyy beats anthonys M spinning rod.. its so much better and dosent flex as much.. also the suffix braid be bought not too long ago works great.. i got my baitcaster back casting again.. it hadnt been casted since i cleaned it so it was real loud and hard to spin.. i got it working good now and she works good.. but the suffix braid, when its wet , puts out a green florrescent looking dye crap.. __________________ For Those I Love, I will Sacrifice: US Army since 2012

03-13-09, 08:05 PM	#3
Jim80 BassFishin.Com Super Veteran Join Date: Apr 2008 Location: Thomaston CT Posts: 3,862	dang monkey , oh well it's not like you didn't need the stuff right ? Jim __________________ In memory of Zooker 1/11/73-7/2/2010. You will be sorely missed and never forgotten.

03-13-09, 08:11 PM	#5
MrPhotographer06 BassFishin.Com Super Veteran Join Date: Mar 2007 Location: Fort Bragg, NC Posts: 2,096	alright.. well it stained the cork on my new rod.. oh well.. haha __________________ For Those I Love, I will Sacrifice: US Army since 2012

03-13-09, 08:17 PM	#6
Jim80 BassFishin.Com Super Veteran Join Date: Apr 2008 Location: Thomaston CT Posts: 3,862	it should were off sooner or later , but in the mean time your just stuck with it . Jim __________________ In memory of Zooker 1/11/73-7/2/2010. You will be sorely missed and never forgotten.

03-13-09, 08:20 PM	#7
MrPhotographer06 BassFishin.Com Super Veteran Join Date: Mar 2007 Location: Fort Bragg, NC Posts: 2,096	iiighhtttt __________________ For Those I Love, I will Sacrifice: US Army since 2012

03-13-09, 09:04 PM	#8
aikenyounggun BassFishin.Com Super Veteran Join Date: Jan 2009 Location: aiken, SC Posts: 2,051	are those walmart spinnerbaits good? just wopnderin.... __________________ <>< Rather be Fishing ><>

03-13-09, 09:09 PM	#9
MrPhotographer06 BassFishin.Com Super Veteran Join Date: Mar 2007 Location: Fort Bragg, NC Posts: 2,096	i think there just as good as any other spinner bait.. they have lead heads.. ..blades, wire and a skirt.. and produce.. so i'd say there just as good as the 3-6 buck baits.. __________________ For Those I Love, I will Sacrifice: US Army since 2012

03-13-09, 10:08 PM	#10
Bubba_Bruiser BassFishin.Com Super Veteran Join Date: Feb 2009 Location: South MS Posts: 3,659	I had to use the Chuck Norris techniques yesterday. I came through Baton Rogue and stopped at BPS. I had a St Croiux (M) spinning rod in my hands. I have been looking for 1for drop shotting and shakey heading. I had a benny and his half brother tucked in my wallet. But I fought and left empty handed somehow. If the oilfield wasn't so bad though, I might have left with a Kistler or E21. __________________ \,,,,/ ROCK ON! HRN4L!

03-13-09, 10:11 PM	#11
BassBandit BassFishin.Com Active Member Join Date: Jun 2005 Location: Kernersville, NC Posts: 430	12# Sufix is a good choice. I really like Sufix. You'll be happy with it.

03-13-09, 11:05 PM	#13
WTL BassFishin.Com Premier Elite Join Date: Dec 2001 Location: Huntsville, Al Posts: 7,466	That looks like a Shakespeare Excursion rod. I have 3 or 4, dont use them much. For $12 they are working rods. __________________ Selling live waterdogs for less since 2005.

03-14-09, 08:55 AM	#14
MrPhotographer06 BassFishin.Com Super Veteran Join Date: Mar 2007 Location: Fort Bragg, NC Posts: 2,096	yeah.. anthony got a spinning one and i liked it but M was too light __________________ For Those I Love, I will Sacrifice: US Army since 2012

03-14-09, 10:06 AM	#15
Bassboss BassFishin.Com Premier Elite Join Date: Jan 2009 Location: Shawano, WI Posts: 7,761	Nice lookin bundle of tackle! What rod is that btw, how much'd it cost you? Good luck with your boat and your fishing! __________________ If you can't fix it with heavy squats or fish oil, you're probably going to die.

03-14-09, 10:16 AM	#18
aikenyounggun BassFishin.Com Super Veteran Join Date: Jan 2009 Location: aiken, SC Posts: 2,051	i might buy a couple b/c a new pond i fished the other day is full of cover and i dont want to lose exspensive spinnerbaits.... that pond is gion to be dynamite for a spinnerbait when it warms up just a little.... there are submerged christmas trees everywhere __________________ <>< Rather be Fishing ><>

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)